初めてペット用の自動給水器を購入してみました。
![](https://tenarai.blog/wp-content/uploads/2024/01/20240120_153744_600.jpg)
STOUCHI の WDQ3 (Amazon) という製品です。
![](https://tenarai.blog/wp-content/uploads/2024/01/20240120_153801_600.jpg)
![](https://tenarai.blog/wp-content/uploads/2024/01/20240120_154230_600.jpg)
左から、ノズル(2種類)、水受け上層、フィルター押さえ、フィルター(予備あり)、フィルタートレイ、ポンプ、ベースタンクです。
なお、右下はポンプメンテナンスのための洗浄器具です。
また、ポンプの電源はUSBですが、コンセントからUSBに変換するアダプタは入っていませんでした。
![](https://tenarai.blog/wp-content/uploads/2024/01/20240120_153854_600.jpg)
回封したところ。水受けは青いシートで守られていて、はがして使います。
![](https://tenarai.blog/wp-content/uploads/2024/01/20240120_154316_600.jpg)
説明書がありましたので、その内容に従い組み立て。
まずは、主要な部品を洗浄しなければいけないようです。
![](https://tenarai.blog/wp-content/uploads/2024/01/20240120_155058_600.jpg)
洗浄後、ポンプをセット。コードがむき出しなので少し違和感があります。
![](https://tenarai.blog/wp-content/uploads/2024/01/20240120_155254_600.jpg)
組み立てというほどのことはなく、無事完成。(部品を載せていくだけ。)
![](https://tenarai.blog/wp-content/uploads/2024/01/20240120_155423_600.jpg)
![](https://tenarai.blog/wp-content/uploads/2024/01/20240120_155524_600.jpg)
水を入れて、動作確認。
うちのは飲んでくれるのでしょうか?
![](https://tenarai.blog/wp-content/uploads/2024/01/20240120_182702_600.jpg)
早速やってきました。観察しています。
![](https://tenarai.blog/wp-content/uploads/2024/01/20240120_182716_600.jpg)
まず、手(前足)を使って確認するのは、いつものことです。
![](https://tenarai.blog/wp-content/uploads/2024/01/20240120_182720_600.jpg)
![](https://tenarai.blog/wp-content/uploads/2024/01/20240120_182726_600.jpg)
飲んでくれました。
![](https://tenarai.blog/wp-content/uploads/2024/01/20240120_155254_600.jpg)
気になった点を挙げていきます。
- タンクの中でポンプのコードがむき出しになっていて、なんとなく気になる
- 電源がUSBなのはよいが、本体側にスイッチがあればよかった(電源のオン・オフはコードの抜き差しとなる)
- タンクの水量の確認がしずらい
- 作動中は青いランプがつくけど、不要ではないか?(動作しているのは水が出ているのでわかる)
コメントを残す